start:system:software:car
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| start:system:software:car [2024/12/01 09:11] – marlonivo | start:system:software:car [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ### Comma AI Installation Guide | ||
| - | #### Step 1: Remove the Rearview Mirror Cover Trim | ||
| - | * **Removal Method**: | ||
| - | * **Hondas**: Strong tug to pop it off. | ||
| - | * **Toyotas**: | ||
| - | * **Tip**: Check YouTube for a comma installation guide specific to your car make. | ||
| - | |||
| - | --- | ||
| - | |||
| - | #### Step 2: Connect Car Harness into the Camera | ||
| - | * Unplug the existing LKAS camera connector. | ||
| - | * Plug the harness connector into the LKAS camera. | ||
| - | * Secure the harness box: | ||
| - | 1. Find a location for the harness box so the trim fits over it. | ||
| - | 2. Use the adhesive sticker to attach the harness box. | ||
| - | |||
| - | --- | ||
| - | |||
| - | #### Step 3: Plug the RJ45 Cable into the Harness Box | ||
| - | * **Steps**: | ||
| - | 1. Plug the RJ45 cable into the harness box – ensure a secure connection. | ||
| - | 2. Route the RJ45 cable across the car to the OBD-II port (usually below the steering wheel, left side). | ||
| - | 3. Plug the RJ45 cable into comma power and connect comma power to the OBD-II port. | ||
| - | |||
| - | --- | ||
| - | |||
| - | #### Step 4: Place Mount High and Centered on the Windshield | ||
| - | * **Mounting Preparation**: | ||
| - | 1. Clean the windshield with the included alcohol wipe and let it dry. | ||
| - | 2. Position the mount so it is fully visible from the driver' | ||
| - | * **Adhere the Mount**: | ||
| - | 1. Remove the 3M tape's cover and press the mount firmly in the center, then along the edges. | ||
| - | 2. Let the adhesive cure for 48 hours before attaching the comma device. | ||
| - | |||
| - | --- | ||
| - | |||
| - | #### Step 5: Plug in OBD-C and Mount the Device | ||
| - | * **Steps**: | ||
| - | 1. Plug the right-angle OBD-C cable into the harness box. | ||
| - | 2. Clean all three lenses of the comma device with the included microfiber cloth. | ||
| - | 3. Plug the OBD-C cable into the back of the comma device and mount it on the windshield. | ||
| - | |||
| - | --- | ||
| - | |||
| - | #### Step 6: Pair Your Device with Comma Connect | ||
| - | * Download the comma connect app and pair your device via **[connect.comma.ai](https:// | ||
| - | * Claim your 1 free month of comma prime. | ||
| - | |||
| - | --- | ||
| - | |||
| - | #### Step 7: Reinstall the Rearview Mirror Cover Trim | ||
| - | * Ensure the car harness fits fully inside the trim. | ||
| - | * Route the OBD-C cable out from the top. | ||