Differences

This shows you the differences between two versions of the page.

--- start:system:openpilot [2024/12/01 09:17] – created marlonivo
+++ start:system:openpilot [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Comma AI Installation Guide ======
-===== Step 1: Remove the Rearview Mirror Cover Trim =====
-  * **Removal Method**:
-    * **Hondas**: Strong tug to pop it off.
-    * **Toyotas**: Slide outward.
-  * **Tip**: Check YouTube for a comma installation guide specific to your car make.
-===== Step 2: Connect Car Harness into the Camera =====
-  - Unplug the existing LKAS camera connector.
-  - Plug the harness connector into the LKAS camera.
-  - Secure the harness box:
-    - Find a location for the harness box so the trim fits over it.
-    - Use the adhesive sticker to attach the harness box.
-===== Step 3: Plug the RJ45 Cable into the Harness Box =====
-  - **Steps**:
-    - Plug the RJ45 cable into the harness box – ensure a secure connection.
-    - Route the RJ45 cable across the car to the OBD-II port (usually below the steering wheel, left side).
-    - Plug the RJ45 cable into comma power and connect comma power to the OBD-II port.
-===== Step 4: Place Mount High and Centered on the Windshield =====
-  - **Mounting Preparation**:
-    - Clean the windshield with the included alcohol wipe and let it dry.
-    - Position the mount so it is fully visible from the driver's seat.
-  - **Adhere the Mount**:
-    - Remove the 3M tape's cover and press the mount firmly in the center, then along the edges.
-    - Let the adhesive cure for 48 hours before attaching the comma device.
-===== Step 5: Plug in OBD-C and Mount the Device =====
-  - **Steps**:
-    - Plug the right-angle OBD-C cable into the harness box.
-    - Clean all three lenses of the comma device with the included microfiber cloth.
-    - Plug the OBD-C cable into the back of the comma device and mount it on the windshield.
-===== Step 6: Pair Your Device with Comma Connect =====
-  - Download the comma connect app and pair your device via **[[https://connect.comma.ai|connect.comma.ai]]**.
-  - Claim your 1 free month of comma prime.
-===== Step 7: Reinstall the Rearview Mirror Cover Trim =====
-  - Ensure the car harness fits fully inside the trim.
-  - Route the OBD-C cable out from the top.