Differences

This shows you the differences between two versions of the page.

--- start:system:software:car [2024/11/08 17:48] – created marlonivo
+++ start:system:software:car [2024/12/01 09:11] (current) – marlonivo
@@ Line 1: / Line 1: @@
-==== COMMA AI =====
+====== Comma AI Installation Guide ======
+===== Step 1: Remove the Rearview Mirror Cover Trim =====
+  * **Removal Method**:
+    * **Hondas**: Strong tug to pop it off.
+    * **Toyotas**: Slide outward.
+  * **Tip**: Check YouTube for a comma installation guide specific to your car make.
+===== Step 2: Connect Car Harness into the Camera =====
+  - Unplug the existing LKAS camera connector.
+  - Plug the harness connector into the LKAS camera.
+  - Secure the harness box:
+    - Find a location for the harness box so the trim fits over it.
+    - Use the adhesive sticker to attach the harness box.
+===== Step 3: Plug the RJ45 Cable into the Harness Box =====
+  - **Steps**:
+    - Plug the RJ45 cable into the harness box – ensure a secure connection.
+    - Route the RJ45 cable across the car to the OBD-II port (usually below the steering wheel, left side).
+    - Plug the RJ45 cable into comma power and connect comma power to the OBD-II port.
+===== Step 4: Place Mount High and Centered on the Windshield =====
+  - **Mounting Preparation**:
+    - Clean the windshield with the included alcohol wipe and let it dry.
+    - Position the mount so it is fully visible from the driver's seat.
+  - **Adhere the Mount**:
+    - Remove the 3M tape's cover and press the mount firmly in the center, then along the edges.
+    - Let the adhesive cure for 48 hours before attaching the comma device.
+===== Step 5: Plug in OBD-C and Mount the Device =====
+  - **Steps**:
+    - Plug the right-angle OBD-C cable into the harness box.
+    - Clean all three lenses of the comma device with the included microfiber cloth.
+    - Plug the OBD-C cable into the back of the comma device and mount it on the windshield.
+===== Step 6: Pair Your Device with Comma Connect =====
+  - Download the comma connect app and pair your device via **[[https://connect.comma.ai|connect.comma.ai]]**.
+  - Claim your 1 free month of comma prime.
+===== Step 7: Reinstall the Rearview Mirror Cover Trim =====
+  - Ensure the car harness fits fully inside the trim.
+  - Route the OBD-C cable out from the top.